Climate Incubator 250L/350L/450L
Operating System
●30 programs can be set, each with individual settings for temperature, humidity and running time, and each program can be repeated 0-99 times.
●Defrost control with 3-stage electric-heating program avoids chamber temperature affected by frosting during low temperature operation.
●Integrated humidifier with intelligent control of the start & stop to the set humidity, ensures stable humidity.
●Compressor temperatures for stop work, frequent work and intermittent work can be set to prolong its life.
●Self-locking LCD display of real-time parameters, and menu setting of temperature, illumination, humidify and time.
●Energy-saving 6-level adjustable LED cold light meets different plants' light need.
Internal Circulation System
●Turbine suction fan and plates with heat dissipating holes, give higher ventilation and better temperature uniformity.
●Back suction and bottom vertical supply air circulation system.
Safety System
●Limited temperature alarm system: auto-stop if limited temperature exceeds and auto audible and visual alarm if alarm-temperature exceeds.
●Refrigerant: R134a environment-friendly, non flammable, non-explosive, non-toxic, non irritating and non corrosive.
●Electric leakage protection device ensures the safety of the operator and other equipment in the laboratory.
●Self diagnostic function: display fault information and facilitate troubleshooting.
Humanized Design
●Detachable and height-adjustable plates with min height of 30mm
●Slide-way bayonet prevents the plates tilt and dislocation.
●Radiable heating ensures temperature uniformity.
●Large arc angle, easy to clean and maintain.
●Display of "END" with buzz reminder.
●Power off memory
●℃/℉convertible
Energy Saving Design
●High efficiency and energy saving compressor with intelligent control of the start & stop, gives stable temperature and low power consumption.
●According to environment and load capacity, auto adjustment to achieve the optimal heating mode and reduce energy consumption.
●New synthetic silica gel seal provides exceptional sealing with heat loss prevention and 25% energy saving.
Model | GIN250C | GIN350C | GIN450C |
Volume (L/cu.ft.) | 250/ 8.83 | 350/ 12.4 | 450/ 15.9 |
Plate Qty (Height Adjustable) | 3 | 3 | 4 |
Load Capacity/Plate | 10kg | ||
Chamber Size (mm) | 555*450*1100 | 550*550*1200 | 700*550*1200 |
Outer Size (mm) | 680*680*1760 | 780*780*1900 | 1030*780*1900 |
Package Size (mm) | 820*800*1920 | 940*990*2080 | 940*1140*2080 |
Net Weight/Gross Weight (kg) | 120/150 | 140/160 | 165/185 |
CBM | 1.26 | 1.94 | 2.23 |
Performance | |||
Temperature Control Range | 10 to 60℃ (light) 4 to 60℃ (without light) | ||
Temperature Accuracy | 0.1℃ | ||
Temperature Fluctuation | ±1℃ | ||
Temperature uniformity | ±1℃ | ±2℃ | ±2℃ |
Luminous Intensity | 0~12000Lx | 0~15000Lx | 0~12000Lx |
lluminance control | 6 relative luminous intensity control | ||
Ambient Temperature | 5℃ ~ 35℃ | ||
Timming Range | 1~9999min | ||
Relative Humidity Range | 50%~90% | ||
Relative Humidity Fluctuation | ±5%~±7% | ||
Temperature Fuctuation | ±1℃ | ||
Control | |||
Display | LCD Display | ||
Controller | Microprocessor | ||
Sensor | PID | ||
Heating Pipe | Corrosion-resistant 304 stainless steel heating tube | ||
Construction | |||
Outer Material | Laser-cutting cold-rolled steel with anti-static spraying | ||
Chamber Material | Corrosion-resistant brushed stainless steel | ||
Plate | One-time formed 304 stainless steel entire plate, no welding spot; Load-bearing beam at the bottom, gives strong bearing capacity. | ||
Insulation | High quality aluminum silicate flutter cotton six-side insulation. | ||
Inner Door | Toughened glass door with lock, 1 | ||
Universal Casters with Brake | Standard | ||
Electrical and Noise Level | |||
Power Supply | 220V/50HZ | ||
Power Consumption | 1100W | 2150W | 2250W |
Power Code | 1.5² | 1.5² | 1.5² |
Noise Level | 52 | 52 | 52 |
ACCESSORIES | |||
Standard | Electric Leakage Protection, Build-in Humidifier Lights (PHILIPS, 6W/pc, 9pcs for 250L, others 27pcs) | ||
Optional | Independent temperature limit controller, Test hole, BOD socket, Printer or RS485 |